garages are full aswell.

A couple that were posted on Facebook from Shootout:

All these nice DSMs and I'm just sitting here surrounded by parts.

Well, it does have the headlights back on now.


I'll finish it one day.

Damn those headlights are clean!

Spyder Sunday....

Looking good, how well HIDs work with those headlights ?

It's about the only clean part on the car lol.

You're still working on that thing?

Yea, every once and a while.
I'm spending a few days out here now trying to get some sh!t knocked off.

My issue now is lack of time (used to be money hahaha). Working away sucks!

Went out playing with the new camera after going to the track Friday, I'm liking it!



Oh ya, and hurting some feels

Just a couple shots from a recent photoshoot in Mississauga..

What did you get, Jason?

D7000

Got my new headlights today, didn't realize how bad the old ones were till I opened the boxes for the new ones.



Also got my new lip the other day, this time I installed threaded inserts into the bottom of the bumper, so it's simply attached with 1/4" thumb screws for easy removal.

LOOK I took the outer plastic peice off the potatoe camera lens and it takes good pics again!!

Lol, much better! I just thought your lens was really scratched

It was... It also had wax.. And oil and gas on it.. That phone has ben thru just bout everything... Even ran over it with the car.

Just going to leave these here

Wheels look beautiful!

Looks damn fresh and much better on the road than on jack stands

Thanks man, I love free porn

Alex has good taste in wheels

lol, you calling me a copycat

Ok how about EDM Tails on 2Gb with CF center unit? ups or downs?

Get an up for me, I like your recent updates for your confused talon

LOL

It is a little confusing!

Although I do like the EDM tail lights.

I would try them out.

What do they go for $$$???

Where to find them????

I like it but I'd probably remove the thumbnail if it were mine, wingless FTW!

Thanks Bryan! Side skirts and the wing...all that's left from Talon



Talk to Terry S. his got hookups



I may just go CLS hatch route...assuming they fit & dont fly off. If i just remove thumbnail than i will expose holes in the hatch

I'm afraid I'm going to have to thumbs that down!

One of the things I love about the 2GB Eclipse rear is the lack of orange. Adding orange turns to a black-and-red scheme looks worse than me in a red shirt.

That would look good too, you are also fairly local to him so you have a little more power to argue for better fitment.

I took the hatch off my parts car and filled the holes and had it paint matched for mine.

Jerry, myself and my cousin at the track

I respect your opinion. Honestly, the biggest drive behind EDMs is how rare they are and not how better looking they are. Within DSM community they defiantly make you "standout from the crowd" but asking none DSMers so far received most negative feedback.

Upon closer examination of EDM vs USDM tails reveals that section in yellow is not made transparent plastic like USDM, few style points lost in my books. While still OEM, it seems like Mitsu rushed it out a bit.







The list possibilities is pretty much endless for DSM
Never gets boring

Looks like it would be more reflective though...?

So brighter = SAFER?

possibly, on EDMs the "yellow" sections are used for blinkers.

Ok, I wanna see a pic of your 4-way's flashing please!

Yea Alex, now you got me thinking... Do the Reds still do the blinking and the yellow stay idle? I don't know why I thought magically the yellow would
Be blinking but I'd assume it would take some re-wiring to do that since the brakes are also involved!

Correct?

You're right Kyle.

Which is why I asked

Yep i completely rewired it to my likens and also had to modify outer flasher sockets so the flash high brightness instead of low. The center pin is ground, by rotating connector i switched from low to high brightness.



As it sits now i have the following configuration:
- outer yellow sections are reserved for flashers only
- LED dual brightness bulbs used in other two square sections.
- high brightness is used for brakes
- low brightness is used for running lights.


flashers plus running lights.



running lights plus brakes

Does the center section between the 2 lit red brake lights not light up?

No 3rd brake light Alex?

I do like the amber look. It's functional!! Good job on the wiring aspect too.

Ok where the eff do I find these? I wanna toy with them too.

Met up with a photographer friend of mine tonight he does amazing work

The dump truck is a nice touch ;P