Hello.

Replacing the old Bushings can be a task but can be done if you have time and patience.

You can either cut, push or burn the old Bushings. Some of the Rear Conrol Arms can be a bitch to remove as the Bolts will probably be rusted inside the Metal Sleeve inside the OE Bushing. Sawzall is what I used.

New Bushings will need to be pressed in. You could take all of the Control Arms off, remove the old ushings and take the Ams to a shop for them to press your bushings in. Or; buy your own Hydraulic Press. IIRC I paid about $150 at Crappy for my 12 Ton Hydraulic Press.

Hope this helps.

Ghislain.