This is something that has started on DSMTalk and DSMLink, I thought it would be nice to bring it to Club DSM Canada.

The thought is, if you need little stuff, and I mean little stuff like the odd clamp, bolt etc. post it up here and see if someone has it. The post was "If anyone needs little stuff, and I mean little stuff, post it here and I'll gladly pay it forward."

So, in saying that, I have a big bucket of bolts in my basement, a 2G parts car and some other random small parts/components from a 1G.

This is done in hopes of helping one another in the community get their cars together faster!

I need a 17mm rear diff bolt, the longer one(?) on top that cannot be removed without taking the subframe out...

I have a complete 2G EGR, mitsu turbo gasket, I need 2g hood hinges..

HAVE: 1g complete rear seatbelt assembly
Bucket-o-bolts
1g Cruise control assembly
1 of the coat hanger hook thingers on the roof
rear washer reservoir


Need:1g Hatch seal

What side of the seal do you need? I should have a good hatch side. no more body sides though.

I need the harnesses from the stock fans both rad and condenser.

I chopped em off to hard wire a different fan setup. Then one fan took a crap. Bought new fans and they are setup with the clips I laughed when I saw it. Was like damn. Don't want to chop this one up If I don't have to. LMK if someone can snip them off ( a little extra wire to solder would be nice there too)

I got a bunch of bolts, a brand new rear main seal for a 2g awd! umm stock cams some other stuff!

OH OH I need those two little grey thingys that hold up the trunk divider things. Like that goes into the hatch and holds the strings on.

I have 1g single piston front calipers, complete with awd 92 rotors and awd 98 rotors for anyone.

Are AWD and FWD the same size rotors?

^yes

The one I need is on the body, goes around the perimeter of the hatch but stays attached to the body, what do you mean by hatch side?

Question: will a 1g cat-back fit onto a 2g catback ??

[i don't think so from what i read,bc they exit opposite sides]

Pretty sure they are very different.

The 92 rotors are for single piston calipers and the 98 rotors are for 2 piston calipers.

I also have stock 92 front brake lines and stock 98 brake lines.

I think theres a rubber piece that goes around the actual hatch part aswell.
But sorry I dont got the body side.

Hmm.. I could really use a breather hose (between the left side of the valve cover and intake tube), if anyone's got one laying around?

I've got one Steve, and I'm coming home first weekend of April, I can stop by and drop it off if you want.

Dude, I should have like 2 or 3 lying around.

bah I thought it was directed at me!

Sorry...


Steven

Well, I take it since the first weekend of April has already gone by, you mean the first weekend of May?

That would be cool, I'm possibly going to be in the fishing derby all that weekend, but we'll talk closer that time and see! Unless Jay's got one that's not all the way in Marmora! haha

Yeah, that's what I meant. Sorry.

If not, I'll drop it off at your place, maybe in your mailbox or with your rents.

Need a working ISC motor. Mine threw a malfunction code at me today.

Have
- red jdm valve cover, no cracks but the paint is chipping
- brand new break pads, for single piston calipers

I'm guessing the ISC motors are different for 1's and 2 g's?

^yes

Sorry, I should have said it's for a 6bolt then

Looking for a connector that attaches to the sensor for a AEM wideband, I have the wire and connector that is attached to the gague. The old one must of ripped off while I was driving.

I've got an ISC here, I think. I'll have to double check. You can have it for $20+shipping.

Need the stock tire iron and handle for the jack, I'd really like to stop carrying around my shop jack for long trips.

I've got one of those as well. PM me.

I just broke a fuel rail bolt. The long one that attaches the rail to the intake mani. Anyone got one?

I need the rubber mounting bushings for the a/c condenser. Anyone?

Great idea and all but isn't this the same as using the WTB WTS forums and listing things as free?

I'm just sayin'

@Brian, I think I might have the rear diff bolt. How soon do you need it. I'm doing a rear swap in about a week or two so you can have the bolt then.

Ya, but from what I get this is people looking for free stuff, and others giving a hand. Not selling or buying

...fixed my post

Tashko, If I need it i'll shoot ya a PM later, I borrowed one off a buddys parts car, thank you

I think I need a dimmerswitch. Uhhh my dad wants the stock 2g gsx exhuast out of here?

Need a 2G EGR Solenoid that works. Going to be in the GTA this week (Monday/Tuesday) specifically in St. Catherine's/Hamilton/Missy/Falls area.

How aboutttt... anyone want two 1ga 16" wheels for ten bucks each?

Need PCV valve hose if anyone has got one

Ryan I think I have an EGR solenoid, ju chen got one of the solenoids in that corner don't know which.
But I am in the london area.....another 2hr drive from the GTA?

I'm going to be at Ziggy's on Tuesday.

It's for a 2G.

One of those 2 is what you need right? And yeah it is off a 2G.

I actually would like both if that's ok.

yep thats cool.

Where do you wanna meet? I can't drive to London.

My car currently sucks and cant drive it far, if you want I can mail it to you?

Sure.

no one has the fan connectors? I really want to get this new fan in!

I have got a 2Ga Talon trunk cover, 1G MAF with wiring and K & N Filter.

by the way, my 1G MAF, is just the MAF and Filter, no tube.

I think this is a great idea. Would we be able to go one step further and creat a sub-forum for this. It can be called FreeCycle or something like that.

DSM Scrapyard

URGENT!!

I need 3 things.

Front Motor Mount for a 1G AWD. Will pay if it's prothane or something. We have the inserts, they aren't going to work as our powdercoat guy melted/punched out the center.

Also need 2 14b/16G style COOLANT banjo bolts. BOTH bolts. This is stopping us from getting the turbo on and we can't prime the motor!

I do believe I have both those bolts on an old broken turbo, let me check tommorow

Needed Driverside motor mount from a 7bolt motor.. the one that is actually bolted to the block and has 2 spike like things on it. I am currently swapping in my 2.4 and I need this mount Let me know

Checked the bolts Ryan, I only have the 2 that go right to the center cartridge on the turbo.

Are they for the coolant lines? Because that's what we need!

Ever find those banjo bolts...I have a few in my box o goodies...pretty sure they're for a 14b/16g...let me know and I'll send em out Tuesday.

Just make sure they take a 22mm wrench, not a 19mm.

Did you find the motor mount? Is it the one by the timing belt or the front of the car by the rad? I got both, i believe, if you don't mind waiting a few days for them via post from Alberta.

By the rad is what we need. 1G AWD.

OK I'll check and see which it is and let you know later today.

Crap, I have every mount but the right one. I even checked my spare block and it had the back motor mount.

The banjos are 19mm

And wouldn't you know it, the spares I have are also 19mm.

Does anybody have the little change holder that sits just ahead and to the left of the shifter? (1GB Manual Tranny).

Also anybody willing to change my front pads? Pleeease?

Kobie, I think I have a spare. I'll check when I get home tonight, if you'd like.

Thanks Gates. What would shipping be? Like $10? lol

Anybody have decent front rotors they're willing to part with? Mine are basically toast

Hey if you find a decent rotors/pads, come over my place and i'll help you work on it.

Did you ever find these, I have a parts car that probably has them on it.

Anyone have a working Alternator for 1G?

Want one that squeals? Lol. It *does* hold a charge.. just... squeals. Was told that the its the alternator bearings.

Not sure how long it will last, but I drove with it for over a week and it was fine.

I think I'll have to take you up on that offer Mike. How bad is the squeal?

It's a pretty annoying squeal...

I can let you know when the alt is removed, hopefully it's within the next few days

Okay, hopefully my car will still be parked on the road lol

I need a coolant overflow bottle

Have a custom FMIC up for grabs. it's LONG and well, if someone wants it. They can have it. I have pics, just pm me.

still have that fmic, might work on a 1g better than a 2g...?

free!!!!!! pm me

I think I have one Mike, but I MIGHT be missing the cap...

I found a overflow bottle a long time ago lol, I was just posting about the fmic.

Oh duurr.. 2011.

free fmic you say do you have any pics?

Hey guys!

I figure this is a long shot, but I might as well post this up here.

I am putting together a team for the ChumpCar world series next year. I will be using a 1991 Eagle Talon Tsi AWD, and trying to do us proud! I had previously done some races with a local in his Dodge Neon, but decided I wanted to build my own car.

I am asking if you guys have anything to donate to the cause, I would be extremely grateful!

Just to give you an idea of some things that we need:

Control Arms, Spare 3 bolt rear axles, 2g Dual Piston Calipers, 1g Rear Calipers, etc

as well as engine parts like spare 450cc injectors, fuel line from filter to rail, stock MAS, Stock Intake Manifold, Stock 2g Exhaust Manifold, etc.

Any parts that you guys feel are just kicking around that you wouldnt mind donating to the cause would be fantastic. Obviously I know I am stretching the limits of this thread with this request, but hey, worth a shot right?

Thanks guys,

Garret.

sorry pedro, i didn't see this post until now.

if you're interested i don't mind send you pics. actually, i'll post them here, hang tight..

Damn, wish you posted this earlier Garret, I would have sent down my stock injectors with the brakes.

I would just like to thank Andrew Trapp and Mike Kuttschrutter for their support so far! I really appreciate the contributions they have made towards getting this car ready for ChumpCar!

I keep forgetting to take pictures when I go work on the car, but I plan on starting a build thread here for all to see, and hopefully that will force me to start documenting the build better.

Would this thing help you guys?

Free to good home

Hey, sorry Mike I didnt look at this section for months. I appreciate the offer, but sadly, we would get penalized for running an aftermarked intercooler. Ridiculous I know, but they see it as a performance enhancement.

I am wondering if anyone has any factory stereo mounting brackets for a 1g. I need one for my winter car, someone decided to help themselves to my stereo. I have a spare bezel and a spare stereo, but I dont have the brackets that you screw to the stereo, then to the dash to hold it in place. If anyone has I would really appreciate that.

Thanks,

Garret.

It's ok. I still actually have that fmic in my garage rafters.

Did the crooks damage anything getting into the car?

Sucks big time! sorry to hear Garret.

Nah, this car was left unlocked apparently on my parents driveway for the past year or so. not even sure when it happened to be honest. Thankfully looks like someone was at least kind enough to bring their own screwdriver haha. They didnt just yank the stereo out, they actually removed it.

Im not to hearbroken, its been broken for almost a year with a blown transmission and I just didnt have the motivation to fix it untill recently. The stereo was probably 5 years old or more, and only worth maybe $40.

Do you still need an intake manifold? I believe I have one in my parents garage. You're in Regina though... and it's pretty heavy... Hmm..

If you don't want it, and someone else does - feel free to take it away.

I have a black rear bumper from a 92 talon if anyone is interested... free, pick up only.

Thanks for the offer, but I've got a few manifolds now. Still looking for stuff likecontrol arms or hubs and suspension components.

I've got rear uppers and a bunch of other stuff for a 2g if that helps?

Does anyone at all have the factory stereo mounting brackets? I am even willing to pay for them, I just cant believe how hard they are to find.

Lol I gave them away free

And im pretty sure I just tossed a set last year while cleaning the garage.

Moral of the story, never throw anything away, ever.....

The most popular quote from the show Hoarders

They laugh at my hording tendencies now, but I will be the one laughing when the world goes to sh!t and I'm the only one with the stuff!!

guess what I just found





I even have the small bolts

Oh I do have to ask, but is that for a 1g or a 2g? If it is a 1g I will take it in a heart beat!

2g

Damnit! haha oh well, thanks for the effort!

I am looking for a single good condition exhaust valve. Im sure someone has upgraded and still has a few used valves kicking around? This car I bought has one burnt valve and that looks like all it would take to get it back on the road.

Thanks,

Garret.

Looking for 2G turbo water lines and banjos.

The t25 has both lines but one is sawed off... the Big16g has the line but its a little differant.. Would these lines work?